LED Emergency Drivers

Emergency Output 1~60W 220~230V AC Emergency Ballast for LED T8

The emergency ballast for LED T8 that suits all your emergency lighting needs. It is specially designed to suit the LED tubes and circuits. Integrated with a Ni-Cd battery and emergency inverter no additional packaging and installations are required.

  • This emergency ballast for Led tube is compatible with the wide range of LED fixtures and runs on the emergency output power of 1W to 60W. Suitable for all LED lights which can be at the same brightness in emergency conditions.

    The product range to cover a variety of LED fixture ideal for high voltage board 220-310V DC LED tube, Led Sensor tube and Tri-proof tube…etc with internal LED driver.

Benefits

  • Maintain precise constant output without jeopardizing the system.
  • Activate automatically in the event of power cuts.
  • The module comes with protection functionality against reverse battery error, surge protection and short circuit problem.
  • The driver works with a variety of LED tubes and fixtures.
  • Certified by CE, RHoS, and EMC.

Product Specifications

  • Model #
  • Driver type:
  • Supported lamp types:
  • Output Emergency Power:
  • Input voltage:
  • Output voltage
  • Charge current (ma):
  • Dimmable:
  • Illumination time (hours):
  • Recharge time (hours):
  • Mode switch time :
  • Self-test ability:
  • Weight (g/pcs):
  • Dimensions (mm):
  • Application Lighting Power Range:
  • Warranty (years):
  • Ambient temperature (℃):
  • Operating temperature (℃):
  • Surge protection:
  • Battery type:
  • Battery dimension (mm):
  • Ip rating w/o casing:
  • Ip rating w casing:
  • Led indicator:
  • Encasing Dimension:
  • LMO103C010A
  • 100% Emergency Power LED Emergency Ballast
  • LED Tube or any LED lights required 100% emergency power
  • 1~60
  • 110V-265V AC，50HZ/60HZ
  • AC220~230V
  • 0.05C
  • No
  • customized
  • 24
  • No
  • 200
  • 217x40x30
  • 1-60W
  • 3
  • 20 to 45
  • 70
  • Yes
  • 12.0V4.0AH Ni-Cd or customized
  • 300mm×66mm×34mm
  • 20
  • 67
  • φ5mm Green LED with 300mm Line,26#
  • 360mm×120mm×45mm
  • Model #: LMO103C010A
  • Driver type: 100% Emergency Power LED Emergency Ballast
  • Supported lamp types: LED Tube or any LED lights required 100% emergency power
  • Output power (watt): 1~60
  • Input voltage: 110V-265V AC，50HZ/60HZ
  • Output voltage: AC220~230V
  • Charge current (ma): 0.05C
  • Dimmable: No
  • Illumination time (hours): customized
  • Recharge time (hours): 24
  • Mode switch time: <0.5 Sec
  • Self-test ability: No
  • Weight (g/pcs): 200
  • Dimensions (mm): 217x40x30
  • Warranty (years): 3
  • Ambient temperature (℃): 20 to 45
  • Operating temperature (℃): 70
  • Surge protection: Yes
  • Battery type: 12.0V4.0AH Ni-Cd or customized
  • Battery dimension (mm): 300mm×66mm×34mm
  • Ip rating w/o casing: 20
  • Ip rating w casing: 67
  • Led indicator: φ5mm Green LED with 300mm Line,26#
  • Encasing Dimension: 360mm×120mm×45mm

Video
Contact Us
sanforce

Share
6 years ago

Recent Posts

الإنارة المستمرة مقابل الإنارة غير المستمرة للطوارئ

أيهما الخيار الأفضل للمباني في السعودية تلعب إنارة الطوارئ دورا محوريا في حماية الأرواح وضمان…

4 weeks ago

Đèn Huỳnh Quang vs Đèn LED Ống: Loại Nào Tốt Hơn?

Trong nhiều năm qua, đèn huỳnh quang từng là lựa chọn chiếu sáng phổ biến…

4 weeks ago

Leuchtstoffröhre vs. LED-Röhre: Welche Beleuchtung ist die bessere Wahl?

Die Beleuchtung spielt in unserem Alltag eine größere Rolle, als man auf den ersten Blick…

1 month ago

مصابيح أنابيب الفلورسنت مقابل مصابيح أنابيب LED

مع التطور المستمر في تقنيات الإضاءة وازدياد الوعي بأهمية كفاءة الطاقة، أصبح الاختيار بين مصابيح…

1 month ago

Sự Khác Biệt Giữa LED Emergency Drivers và Emergency Ballasts: Vì Sao Đèn LED Khẩn Cấp Không Dùng Ballast?

Trong lĩnh vực chiếu sáng hiện đại, đặc biệt là chiếu sáng khẩn cấp trong…

2 months ago

كيف يختلف مُشغّل طوارئ LED عن الـ Ballast؟ ولماذا لا تُستخدم الـ Ballasts في إنارة الطوارئ المعتمدة على LED؟

في عالم الإضاءة، خصوصًا أنظمة إنارة الطوارئ، تبرز تساؤلات متكررة حول الفرق بين LED Emergency…

2 months ago